Apple Processor Cage and Clips Guía de instalación descargar pdf (Pagina 112)

Completing the Upgrade

In the Systems pane, select Physical Disks, and then select the Physical Disks tab. On the Physical

Disks tab, in the drop-down list, select Chunklet Usage.

Figure 93 Upgrade Completion Display

Chunklet initialization can take several hours to complete and the output of the available capacity

is displayed.

NOTE: The system can be used normally, but newly added capacity must be initialized before

it can be allocated.

Adding Expansion Drive Enclosures

To add an expansion drive enclosure:

1. Install the expansion drive enclosure. See “Installing Enclosures ” (page 38).

a. Install the disk drives. See “Installing a Disk Drive” (page 41).

b. Cable the enclosures to each other by using SAS cables. See “Cabling the Storage

System” (page 50).

NOTE: For the drive enclosures, verify that the activity LED is functional (all four LEDs will

be lit solid green), and the LED at the front of the enclosure has a number.

2. Install the 580 W PCMs into the drive enclosure.

3. Install the power cables to the PCMs and press the power switch to ON.

4. After you have completed the physical installation of the enclosures and disk drives, cable the

drive enclosure to the controller nodes.

5. Verify the upgrade is successful.

112 Adding Disk Drives and Expansion Drive Enclosures

1 2 ... 107 108 109 110 111 112 113 114 115 116 117

Sin comentarios

Apple Processor Cage and Clips Guía de instalación Pagina 112