Apple AIRPORTCARD - Airport Networking Network Card Información técnica descargar pdf (Pagina 35)

3 In the Address box in your web browser, enter the IP address of the HP all-in-one,

as shown on the network configuration page. For example, http://195.168.0.5.

The Embedded Web Server Home page appears, showing the HP all-in-one device

information.

Note If you are using a proxy server in your browser, you might need to disable it

to access the Embedded Web Server.

4 If you need to change the language displayed in the Embedded Web Server, do the

following:

a Click the Settings tab.

b Click Select Language in the Settings navigation menu.

c In the Select Language list, click the appropriate language.

d Click Apply.

5 Click the Home tab to access device and network information, or click the

Networking tab to access more network information or to modify network

information.

Caution Be very careful when changing the wireless network settings for the

print server; you could lose your network connection. If you lose your network

connection, you might need to use the new settings to reconnect. If the print

server loses its network connection, you might need to reset it to factory-default

and reinstall the software.

Note Do not disable TCP/IP (Transmission Control Protocol/Internet Protocol) on your

computer. It is required for communication with the Embedded Web Server.

Add security to the network

As with other networks, security for wireless local area networks (WLANs) focuses on

access control and privacy. Traditional WLAN security includes the use of Service Set

Identifiers (SSIDs), open or shared-key authentication, static Wired Equivalent Privacy

(WEP) keys, and optional Media Access Control (MAC) authentication. This

combination offers a rudimentary level of access control and privacy.

If you are using an access point, you might also employ advanced forms of

authentication and encryption on the WLAN, such as the Pre-Shared Key mode of Wi-

Fi Protected Access (WPA-PSK). For definitions of any terms not defined here, see the

Glossary.

To protect your wireless network, HP strongly suggests you implement a wireless

security scheme (either WEP or WPA) during setup, use an antivirus program to

protect against computer viruses, and follow basic security rules such as setting strong

passwords and not opening unknown attachments. Other network components,

including firewalls, intrusion-detection systems, and segmented networks, should also

be considered as part of your network design.

Note If you decide to add encryption and authentication to your network after installing

the HP all-in-one, change the settings on your HP all-in-one prior to changing

them on other devices on your network.

Chapter 8

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 61 62

Sin comentarios

Apple AIRPORTCARD - Airport Networking Network Card Información técnica Pagina 35