Apple Xserve (Early 2008) DIY Procedure for Thermal Grea Manual de usuario

 Xserve (Late 2006/Early 2008)073-1108 Rev. BThermal Grease KitInstructionsThe thermal bond between the processor heat sink and the processor require

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 10Holding the processor by three corners only, keep the processor level as you place it

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 11Note: When installing the processor on the logic board, align the processor notch wit

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 12Replacing the Processor Heat SinksImportant: Before re-installing each heat sink, be

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 13Replacing the Airow DuctLower the airow duct into position on the logic board. 1. N

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 14Closing the XserveReplace and secure the cover.1. Slide the Xserve back into the rack

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 2Removing the Xserve from a RackAlert users that the server will be unavailable for a p

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 3Opening the XserveLoosen the thumbscrews at the back of the top cover and slide the co

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 4 Processor Heat SinkNote: Server congurations with a single processor have a regular

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 5Loosen the four screws securing the heat sink in the order indicated below. 1.

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 6Caution: Whenever you handle the heat sink, handle it from the slotted sides, not the

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 7Caution: Each heat sink is connected to the logic board by a small 2-pin thermal senso

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 8Carefully lift the processor out of the holder. 3. Important: When removing or install

Xserve (Late 2006/Early 2008) Thermal Grease Kit Instructions 9Using the syringe of thermal grease that came with the replacement processor, apply th