Apple Xserve (Early 2008) DIY Procedure for Enclosure Manual de usuario descargar pdf (Pagina 168)

Xserve (Late 2006/Early 2008) Rear ID Tab Replacement Instructions 27

Replacing the PCI Riser Cards and Expansion Cards

Align the riser with slot 1 on the logic board and press to seat the card. 1.

Tighten the captive screws that secure the riser bracket to the back panel.2.

Repeat for the riser in slot 2.3.

Replacing the Power Supplies

Slide the rst power supply all the way into the bay, and then press the handle to seat the 1.

power supply and lock it in place.

Slide the power supply in and

press the handle to seat it.

Repeat for the second power supply, if installed.2.

Closing the Xserve

Replace and secure the cover.1.

Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve 2.

in the rack.

If the server case was locked, use the enclosure key to lock the security lock on the front 3.

panel.

1 2 ... 163 164 165 166 167 168 169

Sin comentarios

Apple Xserve (Early 2008) DIY Procedure for Enclosure Manual de usuario Pagina 168