Apple Xserve (Early 2008) DIY Procedure for Enclosure Manual de usuario Pagina 145

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 169
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 144
Xserve (Late 2006/Early 2008) Rear ID Tab Replacement Instructions 4
PCI Riser Cards and Expansion Cards
Loosen the two captive screws that secure the riser bracket in slot 1 to the back panel.1.
Carefully pull up on the bracket and riser, with the expansion card still attached, to 2.
disconnect the riser from the logic board.
Captive screws
Tilt the expansion card up so that its port clears the enclosure, and remove the card from the 3.
Xserve.
Repeat for the riser card in slot 2. 4.
Vista de pagina 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 168 169

Comentarios a estos manuales

Sin comentarios