Apple Xserve Intel (Late 2006) DIY Procedure for Rear ID Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 22
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Xserve (Late 2006) Rear ID Tab Replacement Instructions 21
Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the order
shown, to prevent the duct from warping. Do not overtighten the screws.
Replacing the PCI Riser Cards and Expansion Cards
Align the riser with slot 1 on the logic board and press to seat the card.
Tighten the captive screws that secure the riser bracket to the back panel.
Repeat for the riser in slot 2.
3.
1.
2.
3.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios