Apple Xserve Intel (Late 2006) Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
40 Chapter 2 Installing or Replacing Components
To install a PCI card:
1 Shut down the Xserve and unplug all cables.
Important: Be sure the Xserve is turned off and the power cords are unplugged before
you install or remove a PCI card or riser.
2 Remove the Xserve from the rack and open it. For instructions, see “Opening and
Closing the Xserve” on page 30.
WARNING: Always wait 5 to 10 minutes for the Xserve to cool down before you work
around the PCI slots. Components near the slots may be very hot.
Expansion slot 1
(PCI-E or PCI-X)
Expansion slot 2
(PCI-E)
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Comentarios a estos manuales

Sin comentarios