Apple Xserve Intel (Late 2006) DIY Procedure for Thermal Manual de usuario

 Xserve (Late 2006)073-1108 Rev. AThermal Grease KitInstructionsThe thermal bond between the processor heat sink and the processor requires thermal g

Xserve (Late 2006) Thermal Grease Kit Instructions 10 Apple Computer, Inc.© 2006 Apple Computer, Inc. All rights reserved.Under the copyright laws,

Xserve (Late 2006) Thermal Grease Kit Instructions 2Removing the Xserve from a RackAlert users that the server will be unavailable for a period of ti

Xserve (Late 2006) Thermal Grease Kit Instructions 3Opening the XserveLoosen the thumbscrews at the back of the top cover and slide the cover back an

Xserve (Late 2006) Thermal Grease Kit Instructions 4Important: Each heat sink is connected to the main logic board by a small 2-pin thermal sensor ca

Xserve (Late 2006) Thermal Grease Kit Instructions 5Using the Thermal Grease KitImportant: Before re-installing each processor heat sink, you will ne

Xserve (Late 2006) Thermal Grease Kit Instructions 6Clean o any existing thermal grease on the top face of the processor using the alcohol wipe prov

Xserve (Late 2006) Thermal Grease Kit Instructions 7Use the edge of the package that the alcohol wipe came in as a spatula to spread the thermal grea

Xserve (Late 2006) Thermal Grease Kit Instructions 8Rotate the top of the holder to the closed position.Engage the latch on the processor holder.Repe

Xserve (Late 2006) Thermal Grease Kit Instructions 9Carefully seat the heat sink over the processor, aligning the four screws with the holes in the l