Apple Xserve Intel (Late 2006) DIY Procedure for Optical Manual de usuario descargar pdf (Pagina 1)

 Xserve (Late 2006)

073-1094 Rev. A

Optical Drive Cable

Replacement Instructions

Follow the instructions in this document carefully. Failure to follow these instructions could

damage your equipment and void its warranty.

Online instructions are available at http://www.apple.com/support/diy/.

Working Safely Inside the Xserve

Always touch the Xserve enclosure to discharge static electricity before you touch any

components inside the Xserve. To avoid generating static electricity, do not walk around the

room until you have nished working inside the server and have replaced the cover. To minimize

the possibility of damage due to static discharge, wear an antistatic wrist strap while you work

inside the Xserve.

Warning: Always shut down the Xserve and disconnect the power cords before opening

it to avoid damaging its internal components or the components you are installing. Don’t

open the server while it is turned on. Even after you shut down the Xserve, its internal

components can be very hot. Let it cool before you open it.

Tools Required

The only tool required for this procedure is a Phillips #1 screwdriver.

Removing the Xserve from a Rack

Alert users that the server will be unavailable for a period of time.

Shut down the Xserve (see the Xserve User’s Guide for help) and then wait to let the Xserve

internal components cool.

Warning: Always shut down the Xserve before opening it to avoid damaging its internal

components or the components you want to install or remove. Don’t open the Xserve

or try to install or remove items inside while it is turned on. Even after you shut down

the Xserve, its internal components can be very hot. Let it cool down for 5 to 10 minutes

before you open it.

1 2 3 4 5 6 7

Indice de contenidos

Pagina 1 - Optical Drive Cable

 Xserve (Late 2006)073-1094 Rev. AOptical Drive CableReplacement InstructionsFollow the instructions in this document carefully. Failure to follow th

Pagina 2 - Opening the Xserve

Xserve (Late 2006) Optical Drive Cable Replacement Instructions 2Unplug all cables from the Xserve. Note: If you have trouble releasing a cable from

Pagina 3 - Airow Duct

Xserve (Late 2006) Optical Drive Cable Replacement Instructions 3Removing the Optical Drive CableNote: Before removing the optical drive cable, you m

Pagina 4 - Fan Array

Xserve (Late 2006) Optical Drive Cable Replacement Instructions 4Fan ArrayLoosen the two thumbscrews that secure the fan array to the enclosure. Note

Pagina 5 - Replacing the Fan Array

Xserve (Late 2006) Optical Drive Cable Replacement Instructions 5Optical Drive CableNote: The optical drive cable is attached to the enclosure with a

Pagina 6 - Replacing the Airow Duct

Xserve (Late 2006) Optical Drive Cable Replacement Instructions 6Replacing the Airow DuctLower the airow duct into position on the logic board. Not

Pagina 7 - Closing the Xserve

Xserve (Late 2006) Optical Drive Cable Replacement Instructions 7Closing the XserveReplace and secure the cover.Slide the Xserve back into the rack,

Mas documentos para Software Apple Xserve Intel (Late 2006) DIY Procedure for Optical

a Ver el documento Apple Xserve Intel (Late 2006) DIY Procedure for Optical Manual de usuario

Apple Xserve Intel (Late 2006) DIY Procedure for Optical Manual de usuario (6 paginas)

Comentarios a estos manuales

Sin comentarios

Apple Xserve Intel (Late 2006) DIY Procedure for Optical Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Software Apple Xserve Intel (Late 2006) DIY Procedure for Optical. Apple Xserve Intel (Late 2006) DIY Procedure for Optical Drive Cable User Manual Manual de usuario

Indice de contenidos

Mas documentos para Software Apple Xserve Intel (Late 2006) DIY Procedure for Optical

Comentarios a estos manuales

Apple Xserve Intel (Late 2006) DIY Procedure for Optical Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Software Apple Xserve Intel (Late 2006) DIY Procedure for Optical. Apple Xserve Intel (Late 2006) DIY Procedure for Optical Drive Cable User Manual Manual de usuario

Indice de contenidos

Mas documentos para Software Apple Xserve Intel (Late 2006) DIY Procedure for Optical

Comentarios a estos manuales

Relacionado con productos y manuales para Software Apple Xserve Intel (Late 2006) DIY Procedure for Optical