Apple Xserve (Early 2008) DIY Procedure for Logic Board Manual de usuario descargar pdf (Pagina 26)

Xserve (Late 2006/Early 2008) Logic Board Replacement Instructions 26

Replacing the Backplane-to-Logic Board I/O Cable

Fold the cable to a 90-degree angle along its creases. 1.

Connect the cable to the logic board rst. Then press the adhesive section of the cable onto 2.

the enclosure before connecting the other end of the cable to the backplane.

Caution: Make sure the cable is fully seated.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Sin comentarios

Apple Xserve (Early 2008) DIY Procedure for Logic Board Manual de usuario Pagina 26