Apple Xserve (Early 2008) DIY Procedure for Expansion Ca Manual de usuario descargar pdf (Pagina 3)

Xserve (Late 2006/Early 2008) PCI Expansion Card Replacement Instructions 3

Loosen the thumbscrews at both ends of the front panel.6.

Grasp the thumbscrews and pull the Xserve forward until the safety latches engage (about 7.

halfway out of the rack).

When the safety latches engage, grip the Xserve where it emerges from the rack, press down 8.

on the latch tabs with your thumbs, and slide the Xserve the rest of the way out of the rack.

SettheXserveonaatsurfaceandunlockit.9.

Opening the Xserve

Loosen the thumbscrews at the back of the top cover and slide the cover back and up to remove

it.Ifyouhavedicultyremovingthecover,checktheenclosurelockonthefrontpanel.

Warning: Even after you shut down the Xserve, its internal components can be very hot. Let

it cool before you open it.

Important: To minimize the possibility of damage to Xserve components due to static discharge,

wear an antistatic wrist strap, if possible, while you work inside the Xserve.

1 2 3 4 5 6

Sin comentarios

Apple Xserve (Early 2008) DIY Procedure for Expansion Ca Manual de usuario Pagina 3