
24 Chapter 5
NetBoot clients are connected directly to the router.
This configuration is similar to the previous one, except there are two NetBoot client
subnets. Each subnet is connected to a different port on the router and a different port on
the server. If this is your configuration, select Peer in the IP Routing Configuration panel of
the NetBoot Server Setup Assistant. For “Router IP address” enter the IP address for the
router port you connect to that subnet.
Router
Clients
(Subnet 2)
Server
Internet
Hub or switch
Hub or switch
Clients
(Subnet 1)
Comentarios a estos manuales