Apple Newton Connection Utilities Manual de usuario descargar pdf (Pagina 3)

Connecting with a serial cable

You use a serial cable to connect your Newton device to the printer or modem

port on the back of your computer. If you don’t have a serial cable, you can

purchase one from an authorized Apple dealer. The cable has mini DIN-8

connectors on both ends.

To connect with a serial cable, follow these steps:

1 Make sure both your computer and your Newton device are turned off.

2 Plug one end of the serial cable into the Newton InterConnect port (or the

Communication port) on your Newton device (or, if you have a MessagePad 2000,

connect to the Newton Serial Adapter, and then plug the adapter into the Newton

InterConnect port).

Note: If you’re using a MessagePad 2000, be sure to connect the cable to the

serial adapter first and then connect the adapter to your MessagePad 2000—

otherwise, your MessagePad may not establish a connection properly.

If you’re using an eMate 300, you can plug the serial cable into either the

Newton InterConnect port or the serial port.

Getting Started

1 2 3 4 5 6 7 8 ... 116 117

Sin comentarios

Apple Newton Connection Utilities Manual de usuario Pagina 3