Apple Workgroup 9150 Especificaciones descargar pdf (Pagina 44)

Troubleshooting Symptom Charts/Hard drive

(Continued)

- 18

Hard drive

(Continued)

No internal SCSI

drives operate

1 Verify there are no duplicate SCSI device addresses.

2 Replace SCSI data cable.

3 Replace power supply.

4 Reseat ROM, RAM, and cache SIMMs, and reseat terminator

card.

5 Replace logic board. Retain customer’s SIMMs.

Drive does not appear

on the desktop

1 Verify there are no duplicate SCSI device addresses.

2 If drive is not initialized, use HD SC Setup to initialize.

(Note: Use Apple RAID to initialize RAID drives for the WS

9150 drives.)

3 Replace SCSI cable.

4 Replace hard drive. (Note: If replacing an Apple WS 9150

RAID drive, you must reinstall the RAID software on the

drive. See “RAID Information” in Basics.)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 129 130

Sin comentarios

Apple Workgroup 9150 Especificaciones Pagina 44