Apple Macintosh Server G4 Manual de usuario descargar pdf (Pagina 2)

2 - Power Mac G4 Processor Upgrade Instructions

1. Locate the heatsink. [On Digital Audio unplug the fan

connector, release the plastic tabs from the processor

card, then remove housing. On Quicksilver: remove

screws on rubber fan housing through grill at the

back of the computer. Lift straight up to remove.]

2. Press down on the top of the heatsink clip, use a

small atblade screwdriver to lift up and out on the

front tab of the clip to release it.

3. Remove the heatsink clip and lift the heatsink o the

processor module.

Warning: When removing the heatsink, be careful

not to bend the processor module beneath it.

3. Remove the processor mounting screws.

4. To disconnect the processor from the main

logic board, hold it by the edges nearest the

two opposing screw holes (on either side of the

connector), gently rock the processor right to left,

and lift straight up. If your computer’s conguration

has RAM installed that makes it dicult to hold the

processor correctly, remove one row of RAM to give

you better access.

Warning: Hold the module as shown when

removing or installing it to avoid bending the

processor connector pins. Lifting processor

from the side with one screw could damage

computer and void Apple’s warranty.

Original Processor Removal:

Mounting Screws

1 2 3 4 5

Sin comentarios

Apple Macintosh Server G4 Manual de usuario Pagina 2