Apple LaserWriter Select 310 Especificaciones descargar pdf (Pagina 53)

Flowcharts and TablesTroubleshooting

Go to Flowchart 2.

Does the

Ready/In Use LED

glow steadily after

warmup?

Yes

Run the LaserWriter Select 360 printer diagnostic (see "Printer Diagnostics"

section). Replace modules as indicated in the "Printer Diagnostics" section.

If no specific error is indicated during the diagnostic, switch off the printer,

jumper the pins at JMP1 on the I/O controller, and return the mode switch

to its original setting.

Open the File menu and choose Print Window or Print Directory.

Does the

printer print

from a

Macintosh?

Yes

Is the

print quality

OK?

Yes

Go to "Print Quality

Problems."

1. Place paper on the manual feed tray.

2. Open the File menu and choose Print Window or Print Directory.

3. Select Manual Feed as the paper source in the Print dialog box.

Yes

Go to Table 30,

No Paper Pickup From

Manual Feed or

Multipurpose Tray.

Does the

printer deliver

a manually fed

page?

The printer is fully functional.

Go to Table 7 or 8,

depending on the specific

I/O board error.

START

LaserWriter Select 360 Flowchart 1

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 255 256

Sin comentarios

Apple LaserWriter Select 310 Especificaciones Pagina 53