Apple 12/640PS Información técnica Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 354
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
What to do after connecting to a single Mac OS computer
m If you wish to connect the printer to other networks, or to connect the
printer directly to a Windows or DOS computer, see the appropriate
sections later in this chapter.
m If youre finished connecting the printer, skip to “Adjusting Communication
Settings,later in this chapter.
See Chapter 2 for more information about setting up the printer on a
LocalTalk network, or Appendix B for information about setting up the
printer on a NetWare network running ATPS.
Connecting to an Ethernet network
A single Ethernet cable can carry a number of network protocols, including
AppleTalk (called EtherTalk when its on an Ethernet network), Novell
NetWare, and TCP/IP (Transmission Control Protocol/Internet Protocol). To
connect the printer to an Ethernet network running any combination of these
protocols, follow these steps:
1 Obtain an Ethernet transceiver and a length of Ethernet cable appropriate for your
network’s media type—thin, thick, or twisted pair.
2Plug the short cable from the transceiver into the Ethernet port (
G
) on the printer.
Apple Ethernet
thin coaxial transceiver
Apple Ethernet
AUI adapter
Apple Ethernet
twisted-pair transceiver
20
Chapter 1
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 353 354

Comentarios a estos manuales

Sin comentarios