Apple Xserve RAID User's guide Guía de usuario descargar pdf (Pagina 27)

Mounting Xserve RAID in a Rack 27

Assemble the Brackets and Extenders

Follow these steps to assemble the brackets and extenders for the depth of your rack.

For a Rack 24 to 29 Inches Deep

1 Gather the two large brackets (items A1 and A2) and the two longer extenders (item B in the

illustration below), along with the necessary screws:

m six short screws for assembling two brackets and extenders

m four long screws for securing the brackets to the rack

m two mounting screws for attaching the system to the rack

2 Place the cut-out area of the extender (B) over the three posts that extend from the wider

side of the bracket A.

3 Fasten the bracket and extender together using three short screws and tighten the screws.

Note that you can still slide the extender backward and forward.

A1 and A2

Short screws

Mounting template

Pass three of the short

screws through the slot in part B and

attach them to part A1 or A2. Tighten them securely.

Make sure part B fits under the tabs on part A1 or A2.

A1 or A2

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

Sin comentarios

Apple Xserve RAID User's guide Guía de usuario Pagina 27