Apple Power Macintosh G3 Minitower Información técnica descargar pdf (Pagina 53)

Installing PCI Cards, Memory, and Internal Storage Devices 53

1 Remove the screw that holds the port access cover in place, pull out the access cover, and set

it aside.

Important If you remove all three port access covers, do not disturb the foil shield lying

against the back panel. If the shield slips out of the space between the back panel and the

main logic board, tuck it back in before you close the computer. Damage could result if the

foil touches the logic board while the computer is turned on.

2 Remove the PCI card from its static-proof bag and hold it by its corners, taking care not to

touch the gold connector or any of the components on the card.

Connector

Port access cover

Sheet metal

shield

Remove the screw that holds

the port access cover in place.

If you remove

all three port

access covers,

make sure that

the sheet

metal shield

remains

tucked under

the edge of

the main

logic board.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 87 88

Sin comentarios

Apple Power Macintosh G3 Minitower Información técnica Pagina 53