Apple Power Macintosh G3 Minitower Especificaciones Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 292
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Basics Data Buses - 22
media like CD-ROM's are jumpered in exactly the same way,
and they have the advantage of having their jumpers much
more universally labeled than their hard disk counterparts.
If you are using two drives on a channel, it is important to
ensure that they are jumpered correctly. Making both
drives the master, or both the slave will likely result in a
very confused system.
Note
: It makes no difference which connector on the ATA/
IDE cable is used in a standard ATA/IDE setup, because it is
the jumpers that control master and slave, not the cable. As
long as one device is jumpered as master and the other as
slave, any two ATA/IDE or ATAPI devices should work
together on a single channel.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 291 292

Comentarios a estos manuales

Sin comentarios