search

Apple CP-RX80 Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
29
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item Description
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL
4:3
16:9
16:10
For a video signal, s-video signal or component video signal
4:3
16:9
14:9
For no signal
4:3 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)
Large (It reduces picture)
• This item can be selected only for a video, s-video and component
video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
V POSITION
Using the ◄/► buttons adjusts the vertical position.
Down
Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
on OVER SCAN (
above) setting. It is not possible to adjust when
OVER SCAN is set to 10.
H POSITION
Using the ◄/► buttons adjusts the horizontal position.
Left
Right
•
Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
on OVER SCAN (
above) setting. It is not possible to adjust when
OVER SCAN is set to 10.
(continued on next page)
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Proyectores de datos Apple CP-RX80
Proyectores de datos Apple CPX3 Manual de usuario   (61 paginas)
Proyectores de datos Apple 9000-INT Manual de instrucciones   (74 paginas)
Proyectores de datos Apple LP 650 Guía de usuario   (47 paginas)
Proyectores de datos Apple User^aEURTMs Guide NMB-003 Guía de usuario   (50 paginas)
Proyectores de datos Apple LP 650 Guía de usuario   (59 paginas)
Proyectores de datos Apple CPX5 Manual de usuario   (66 paginas)
Proyectores de datos Apple air filter Manual de usuario   (55 paginas)
Proyectores de datos Apple PJL855 Guía de usuario   (19 paginas)
  • Pureguardian ECO Myricom Worcester PADM
  • Kenwood Inicio conjuntos de audio Airfree Filtros de aire Netgear Accesorios de la cámara Olympus Reproductores de mp3 / mp4 Elkay Cables De Vídeo Compuesto
  • Kicker KSR100 Substation JVC HM-HDS1U Karcher WV 60 Plus LG 55UF6800 Altec Lansing inMotion iM4
  • ViewSonic P95f+ Manual de usuario Casio EX-FR100 Manual de usuario Smeg C7280FP Hoja informativa Campbell Hausfeld FP2052 Instrucciones de operaciones Sony-ericsson T715(T715) Manual de usuario