Apple Xserve G5 Manual de usuario descargar pdf (Pagina 36)

36 Chapter 3 Installing Your Server in a Rack

7 Slide the brace forward or backward so that the flat end of the brace is flush with the

back post of the rack, and screw the brace’s flange to the post.

8 Attach the second bracket and brace, as described in steps 3 through 7.

Note: If your rack is deeper than the server, the braces and brackets extend beyond the

server’s back panel to the rack’s posts.

Place the Server in the Rack

Once you’ve attached the cover, you can put the server into the rack.

1 At the front of the rack, lift the server to the level where the enclosure’s cover is

installed and slide the server into the cover.

Attach the cover

to the two rear rack

posts using four of the

screws provided.

Insert the server into the cover

and slide it all the way back.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Sin comentarios

Apple Xserve G5 Manual de usuario Pagina 36