Apple Power Macintosh (7100 Series) Manual de usuario descargar pdf (Pagina 56)

Then follow these steps:

1 Assemble the VCR, television, microphone, and cables you need.

Be sure to use a microphone designed for your model of the Macintosh, such

as the Apple PlainTalk Microphone.

You need the following cables (available at an electronics supply store):

m Video cable with S-video connectors or RCA plugs at each end. (If you’re

using a video cable with RCA plugs, you’ll also need the adapter cable for

composite video.)

m Audio cable with dual RCA plugs at one end and a 3.5-mm stereo miniplug

at the other end.

m A cable to connect your VCR to your television.

Use a cable with an RCA or S-video plug to connect the VCR to the

television. Do not use coaxial cable.

You can also use an all-in-one cable (with one video and two audio RCA

plugs at each end) if you attach appropriate adapters.

IMPORTANT

A Y-shaped adapter is supplied with the round microphone for

some models of the Macintosh. This adapter is not compatible with your

Power Macintosh.

2 Attach one end of the video cable to the Video In port on the VCR.

Follow the directions that came with the VCR.

Stereo miniplug

RCA

S-video

RCA RCA

S-video

Adapter for composite video

Chapter 3

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 143 144

Sin comentarios

Apple Power Macintosh (7100 Series) Manual de usuario Pagina 56